Skip to main content
Modular Reality

Product Compliance

Last update: August 17, 2026

This page gathers the conformity and safety information for the MR-Link magnetic charging cables. It is the destination of the link and QR code printed on the product packaging.

1. Product and models covered

MR-Link magnetic charging cable, 1 m length, in its four connector configurations and two finishes (black and white):

  • CABLE-AC-1M-BLK / CABLE-AC-1M-WHT — USB-A to USB-C, 60 W (3 A). Factory reference XG11.
  • CABLE-AL-1M-BLK / CABLE-AL-1M-WHT — USB-A to 8-pin connector, 12 W (2.4 A). Factory reference XG12.
  • CABLE-CL-1M-BLK / CABLE-CL-1M-WHT — USB-C to 8-pin connector, 27 W PD (3 A). Factory reference XG13.
  • CABLE-CC-1M-BLK — USB-C to USB-C, 100 W (5 A). Factory reference XG15.
  • Data transfer: 480 Mbps (USB 2.0) on all models.
  • Each unit is identified by the EAN barcode printed on its box.

2. Manufacturer

The product is manufactured by:

  • Dongguan Guangao Electronics Technology Co., Ltd
  • 2nd Floor, Building A, Zhuoye Science and Technology Park, Puxinhu Commercial Street, Tangxia Town, Dongguan City, Guangdong Province 523000, China
  • Country of manufacture: China.

3. Brand and distribution

The product is marketed under the Modular Reality brand:

  • Modular Reality — Andrés Moreno Quijada
  • Kawasaki (Kanagawa), Japan
  • Electronic contact address: [email protected] — modularreality.com
  • The full postal address is provided without delay upon written request, and to the competent authorities.

4. Responsible person in the European Union

In accordance with Article 16 of Regulation (EU) 2023/988 on general product safety, the responsible person established in the European Union for this product is:

  • Andrés Moreno Sanz
  • Calle Fresnedilla 1, planta baja puerta 16, 28752 Lozoyuela-Navas-Sieteiglesias (Madrid), Spain
  • Electronic contact address: [email protected]
  • Acting under a written mandate accepted by both parties. Verifies that the declaration of conformity and the technical documentation have been drawn up, keeps them at the disposal of the market surveillance authorities for ten years, and cooperates with them on any measure that eliminates or mitigates a risk posed by the product.

5. CE marking and standards applied

The product bears the CE marking. The harmonised standards applied and verified through laboratory testing are as follows:

  • Directive 2014/30/EU (electromagnetic compatibility) — EN 55032:2015+A1:2020, EN 55035:2017+A11:2020, EN IEC 61000-3-2:2019+A1:2021 and EN 61000-3-3:2013+A2:2021+AC:2022. Tested with no deviation from the applicable standards.
  • Directive 2011/65/EU (RoHS), Annex II as amended by (EU) 2015/863 and (EU) 2017/2102 — testing for lead, cadmium, mercury, hexavalent chromium, PBBs, PBDEs, DEHP, BBP, DBP and DIBP across all cable components. Result: not detected in all measured parameters.

6. Test reports

Testing was carried out by Shenzhen HTT Technology Co., Ltd. (Shenzhen, China) on product samples between 5 and 11 April 2024:

  • HTT202404150ER-1 — EMC test report to EN standards (European Union).
  • HTT202404150ER-2 — EMC test report to BS EN standards (United Kingdom).
  • HTT202404150CH — RoHS test report.
  • HTT202404150FR — FCC test report (United States).
  • A copy of any of these reports is available upon written request to [email protected].

7. Technical documentation

The product's technical documentation and the declaration of conformity issued by the manufacturer are retained and made available to market surveillance authorities upon request. For any enquiry regarding product conformity or safety, please write to [email protected].

8. Safe use

Product safety warnings:

  • Not suitable for children under 3 years: contains small parts and magnets.
  • Keep out of reach of children.
  • Avoid heat, moisture and prolonged exposure to sunlight.
  • Do not use if the cable or connectors show visible damage.
  • The connectors contain permanent magnets: keep them away from magnetic stripe cards, pacemakers and other implanted medical devices.

9. Recycling

The product and its packaging are recyclable. At the end of its service life, dispose of the cable at a collection point for waste electrical and electronic equipment, and the packaging in the appropriate paper and cardboard container. Do not dispose of them with household waste.